Serving Brooklyn, Queens and Long Island(929) 429-2429Open six days a weekFree estimateGuaranteed work
On Point Garage Doors
Open 24 hours Sun-Thu, Fri until 5 pm Free estimate Springs, openers, cables We come to you
Emergency?Call nowBook free estimate
New York, NY - open six days a week

Haas garage doors

Free estimateSame-day serviceCommon parts on board
  • Free estimate
  • Same-day service
  • Common parts on board
Emergency garage door repair★★★★★ 5.0 on Google · 42 reviews

Book your free estimate

Takes 30 seconds. We call you back to set a time.

Or just call (929) 429-2429 and talk it through.

Home › Haas Garage Doors

Haas is a family-owned American door maker that sells through dealers and installers rather than big stores, so many owners do not know the brand until they see the name on a label inside the door. Haas makes residential sectional doors in steel and wood-look finishes, plus commercial sectional and rolling doors. They are solid, straightforward doors, and most of what goes wrong with them is the same wear we see on every door. We repair Haas garage doors and install new ones across Brooklyn, Queens and Long Island. Free estimate at (929) 429-2429.

By Sean Cohen, owner, On Point Garage Doors · Updated

Real jobs. Real photos.

These photos are from our own jobs, with our logo on them.

Carriage-style doors on a brick house, from one of our jobs
Carriage-style doors on a brick house
A wood-look garage door, from one of our jobs
A wood-look garage door
Window row on a new door, inside, from one of our jobs
Window row on a new door, inside

How to tell if your door is a Haas

Look for a label on the inside of a section, often near the bottom or on the end stile, and sometimes on the track or a bracket. It may show the maker, the model line and a date. If the label is gone, the style of the sections and the hardware still tell a technician a lot. Knowing the maker and the line helps us match a section or a seal, so it is worth a look before you call.

Residential lines and styles

Haas doors for homes come in raised panel and flat panel steel, carriage-house styles with decorative hardware, and wood-look finishes that give the warmth of wood without the upkeep. Insulation ranges from a plain steel door to sections filled with foam. Window rows can be added to most styles. That range means two Haas doors on the same block can look and weigh very different, and the springs have to be chosen for each one.

Springs matched to the door

The springs carry the weight of the door so the opener only has to guide it. When a spring breaks, the door suddenly feels very heavy and the opener strains or stops. A heavier insulated door with windows needs stronger springs than a plain one of the same size. We measure the door and the old springs and choose replacements that balance this door, not a generic set that only gets close.

Cables, rollers and tracks

Cables fray at the bottom brackets, rollers wear flat or crack, and tracks get bent when a car bumps the door. On a Haas door these parts are standard sizes, so in most cases we carry what is needed. Worn rollers are one of the most common reasons a door is noisy, and replacing them with sealed rollers often makes a big difference to how smooth and quiet the door runs.

Matching a damaged section

When one section is dented or creased, replacing just that section is often possible if the line and color are still made. Because Haas sells through dealers, sections are usually ordered rather than pulled from a shelf. We read the label, check the style and the color, and tell you whether an exact match is likely or whether the door is old enough that a new door makes more sense.

Seals and weather

Bottom seals wear through, side and top seals dry out in the sun, and a door that no longer sits level lets water and leaves in. We replace worn seals with a shape that fits the bottom retainer on your door, and if the door is closing unevenly, we find out whether the cause is the floor, the cables or the springs before we fit the seal.

Haas commercial doors

Shops, warehouses and garages for trucks use Haas commercial sectional doors and rolling doors. These doors work far harder than a home door, and springs and rollers wear sooner. We service the doors and their operators, check the safety devices and plan spring changes on busy doors so they are replaced before they break in the middle of a working week.

Openers on a Haas door

Haas makes the door, not the opener, so your opener could be any brand. We repair the common brands and install new ones sized for the door. If you are replacing the door, we check whether your current opener can stay or whether the new door is heavier or taller than it can handle.

Choosing a new Haas door

If you are replacing an old door, we go over the styles, insulation, windows and colors with you, and measure the opening, the headroom and the side room. We check the frame and the header so the new door has something solid to mount to. You see the options and a written estimate before anything is ordered.

Haas and the other brands

Haas sits alongside other dealer-sold makers. The differences between brands are often smaller than the differences between the lines inside one brand. What decides how a door feels and lasts is the right springs, a straight install and good seals. We help you compare a few options and pick the one that suits the house, not the one with the loudest name.

What a visit includes

We look at the door, test the balance, check the springs, cables, rollers, tracks and seals, and run the opener and the safety reverse. You get a clear explanation of what is wrong, what is standard and what has to be ordered, and a written estimate before any work starts.

Questions we get asked

Do you work on Haas garage doors?

Yes. We repair springs, cables, rollers, tracks, seals and sections on Haas doors, and we install new Haas doors.

Where do I find out if my door is a Haas?

Look for a label on the inside of a section, on the end stile or near the bottom. It often shows the maker and the line.

Can one damaged section on a Haas door be replaced?

Often, if the line and color are still made. We read the label and tell you how likely an exact match is.

Do Haas doors need special springs?

They need springs sized for the weight of the door, like any door. We measure the door and choose springs to balance it.

Is the estimate free?

Yes. You get a written estimate before any work starts.

Booking takes a minute

Across Brooklyn, Queens and Long Island, tell us what the door is doing and we set a visit that fits your day.

Free estimate, call (929) 429-2429.

Haas door giving you trouble? We will look at it

Tell us what the door is doing and we will give you an honest arrival time. The estimate is free.

Easier to explain by phone? Call (929) 429-2429.

Two minutes to a free estimate

Tell us what the door is doing. The estimate is free either way.

Or just call (929) 429-2429 and talk it through.

The other six things that go wrong