Serving Brooklyn, Queens and Long Island(929) 429-2429Open six days a weekFree estimateGuaranteed work
On Point Garage Doors
Open 24 hours Sun-Thu, Fri until 5 pm Free estimate Springs, openers, cables We come to you
Emergency?Call nowBook free estimate
New York, NY - open six days a week

Garage door opener gear replacement

Free estimateSame-day serviceCommon parts on board
  • Free estimate
  • Same-day service
  • Common parts on board
Emergency garage door repair★★★★★ 5.0 on Google · 42 reviews

Book your free estimate

Takes 30 seconds. We call you back to set a time.

Or just call (929) 429-2429 and talk it through.

Home › Opener Gear Replacement

Inside many chain and belt openers, the motor turns a gear that drives the sprocket that moves the chain or belt. On a great many models, that gear is plastic. After years of use, or after the opener has fought a heavy door, its teeth wear away. The motor runs, you hear a whir or a grind, and the door does not move. A new gear set often brings the opener back. Free estimate at (929) 429-2429.

By Sean Cohen, owner, On Point Garage Doors · Updated

Real jobs. Real photos.

These photos are from our own jobs, with our logo on them.

Opener on the ceiling, from one of our jobs
Opener on the ceiling
Inside an opener, from one of our jobs
Inside an opener
New garage door spring installed by On Point Garage Doors
Springs and cables

Signs of a stripped gear

  1. Motor runs, door does not moveThe classic sign: the light comes on and the motor hums or whirs.
  2. Grinding inside the openerWorn teeth slip and grind against each other.
  3. Chain or belt does not moveThe drive stays still even though the motor is running.
  4. Door stops partwayA partly worn gear slips under load.
  5. Plastic shavingsBits of plastic fall from the opener onto the floor or the car.

Why gears wear out

Every trip puts load on the gear. A balanced door keeps that load light; a door with weak springs makes the opener lift weight the springs should carry, and the gear wears much faster. Openers that have been running for many years, on busy family doors, are the most likely to strip.

Rule out the door first

Before replacing a gear, the door is disconnected and tested by hand. If a spring is broken or weak, the door is too heavy, and a new gear would strip again. Fixing the springs comes first, then the gear.

Also rule out the trolley

If the chain or belt moves but the door does not, the trolley may simply be disconnected from the emergency release, not a stripped gear. That is checked before any parts are replaced.

When a gear kit makes sense

When a new opener makes more sense

If the opener is very old, has no safety sensors, uses fixed-code remotes, has a failing board as well, or parts are no longer made, a new opener is usually the better choice. A new opener can also add quiet operation, phone control and battery backup. You get a free estimate on both.

What replacing a gear involves

The opener is taken down or opened up, the old gear and sprocket assembly removed, the worn plastic cleaned out, and a new gear set installed with the right grease. The limit settings are checked, the opener is mounted back, and the door is run and tested.

Screw-drive and belt openers

Screw-drive openers have their own wear parts, like the carriage on the threaded rod. Belt-drive openers use gears too. The technician identifies your opener type and the part that has worn.

Preventing the next one

Keep the door balanced with healthy springs, replace worn rollers, and have a yearly tune-up. An opener that only guides a balanced door can run for many years on its original gear.

What a visit includes

The technician tests the door's balance, checks the springs and trolley, opens the opener to inspect the gear, explains whether a gear kit or a new opener makes more sense, and gives you a free estimate. After the repair, travel and force are set and the safety reverse is tested.

Common brands with replaceable gears

Many LiftMaster, Chamberlain, Craftsman and Genie openers have replaceable gear sets. Parts availability depends on the model and its age.

Grinding before it strips

Many gears give warning before they fail: a grinding or clicking from the opener, a door that hesitates at the start, or plastic dust under the unit. Catching it then, and fixing the springs if the door is heavy, can save the gear and the opener.

After the repair

Once a new gear is in, the door's balance, the travel limits and the force are checked, so the new gear is not straining from the start. A door that was heavy because of weak springs gets those fixed in the same visit.

Openers on busy family doors

When the garage is the main way in and out of the house, the opener may run many times a day. Those openers wear gears faster, and a heavier-duty opener can make sense when the old one finally gives out.

Noise after a gear replacement

A new gear set often makes an older opener quieter, because the worn teeth that clattered are gone. If the opener is still loud, the chain, the rail mount or the door's rollers are the next things to check.

Gears and chain tension

A chain set too tight puts extra load on the gear on every trip; too loose, and it slaps and jumps. The chain or belt is set to the right tension when the gear is replaced.

Questions we get asked

Why does my opener run but the door does not move?

Often a stripped drive gear, a disconnected trolley or a broken spring making the door too heavy.

Can a stripped opener gear be replaced?

On many openers, yes, with a gear kit, if the rest of the opener is sound.

Why did my opener gear strip?

Years of use and lifting a door with weak springs wear the gear's plastic teeth.

Is it worth fixing an old opener?

If it has safety sensors and parts are available, often yes. Otherwise a new opener is better.

Is the estimate free?

Yes. You see the options before any work starts.

Booking takes a minute

Across Brooklyn, Queens and Long Island, tell us what the door is doing and we set a visit that fits your day.

Free estimate, call (929) 429-2429.

Not sure what is wrong? We will come and look

Tell us what the door is doing and we will give you an honest arrival time. The estimate is free.

Easier to explain by phone? Call (929) 429-2429.

Two minutes to a free estimate

Tell us what the door is doing. The estimate is free either way.

Or just call (929) 429-2429 and talk it through.

The other six things that go wrong