
Takes 30 seconds. We call you back to set a time.
Sommer openers are less common than the big names, but owners who have one tend to like it. The company comes from Germany, and its openers work differently from most of what is on the market: the motor itself travels along the rail on a fixed chain, instead of sitting on the ceiling and pulling a trolley. That design is quiet and has few moving parts, but it also means a Sommer is repaired a little differently. We service Sommer openers alongside every other major brand across Brooklyn, Queens and Long Island. Free estimate at (929) 429-2429.
By Sean Cohen, owner, On Point Garage Doors · Updated
These photos are from our own jobs, with our logo on them.



On most openers, a motor head hangs from the ceiling and pulls a trolley along the rail with a chain, belt or screw. On a Sommer, the chain is fixed inside the rail and does not move. The motor rides along it on a carriage, pulling itself and the door with it. Because the chain only meshes with one gear, there is little to wear and little to rattle. The motor is also small enough that the opener looks tidy on the ceiling.
The direct drive design is quiet, which matters in garages under bedrooms and in attached homes. It is also simple, with fewer parts to wear than a trolley opener, and it handles normal residential doors well. Some models are built for heavier doors and higher use. Many were installed by dealers who carried European doors, so they turn up on custom and higher-end homes more often than on basic installs.
Like any opener, a Sommer is only as good as the door it lifts. A broken spring, a frayed cable, a stiff roller or a door out of balance makes the motor strain. Because the motor on a Sommer travels with the door, strain can show up as slipping or skipping on the chain rather than humming at the ceiling. We disconnect the opener and check the door by hand before touching the opener.
Since the motor moves, the power reaches it through the rail or along a guided path rather than a short cord at the ceiling. That path can be pinched by stored items, worn where it flexes, or worked free after years of use. A Sommer that stops partway or loses power at one point in its travel often has a problem along that path, which the technician traces before replacing parts.
Sommer uses its own remotes and keypads. Original remotes are not always on the shelf at the hardware store, so they may need to be ordered. Many car buttons can learn a Sommer, sometimes with a bridge part. If you have lost remotes or moved into a home with a Sommer and no remotes, we can clear the old ones and pair new ones so only yours open the door.
The opener learns where the door stops at the top and the bottom and how much force it should take to move it. When those settings drift, the door may stop short, slam the floor or reverse for no clear reason. Setting them correctly is a job for the technician, done with the door balanced and the safety devices tested afterward.
Sommer parts are not stocked everywhere, but common items like remotes, sensors and some boards can be ordered. Before any order, we confirm the exact model and tell you what is available. If a needed part is hard to get, we say so and give you the option of a new opener instead.
If the opener is old, the motor or carriage is worn and parts are scarce, or you want features like a phone app that your model does not have, a new opener may be the better choice. Some owners stay with Sommer for the quiet design. Others move to a belt drive or a wall-mount opener from a brand with parts on every shelf. We explain the options and let you decide.
Many Sommer openers were installed with imported or custom doors. Those doors may have their own springs, tracks and hardware that differ from the usual parts. We look at the whole door and opener as one system, so a repair to one does not create a problem for the other.
The technician checks the door's springs, cables, rollers and balance, then tests the opener's travel, limits, force, safety reverse, photo eyes, remotes and keypad. They look at the chain, the carriage and the wiring path. You get a clear explanation and a written estimate before any part is changed.
The chain is fixed inside the rail and the motor travels along it, pulling the door. Most other openers keep the motor on the ceiling and pull a trolley.
Yes. We service them like any other brand. Some parts need to be ordered, and we confirm the model and what is available before ordering.
Often the limits have drifted, the door is out of balance or the wiring path to the moving motor has a fault. The technician checks all three.
Usually, yes, though they may need to be ordered. Many car buttons can also learn the opener.
Yes. We look at the door and the opener and explain the options before any work.
Across Brooklyn, Queens and Long Island, tell us what the door is doing and we set a visit that fits your day.
Free estimate, call (929) 429-2429.
Tell us what the door is doing and we will give you an honest arrival time. The estimate is free.
Easier to explain by phone? Call (929) 429-2429.
Tell us what the door is doing. The estimate is free either way.