
Takes 30 seconds. We call you back to set a time.
Linear is a name many people know from their remotes rather than their opener. Linear openers and access products are common in homes, in shared parking garages under apartment buildings, and on gated driveways, and their remotes are used in many buildings with shared garage doors. We repair Linear openers, set up their remotes and replace units that have reached the end of their life. Free estimate at (929) 429-2429.
By Sean Cohen, owner, On Point Garage Doors · Updated
These photos are from our own jobs, with our logo on them.



Many apartment buildings and condo garages use remotes for a shared door. When a resident moves out or loses a remote, it should be removed from the system. Building managers often need remotes added and removed regularly. We set up and test remotes for shared doors.
Linear products are also common on driveway gates and building entrances, with keypads, receivers and remotes. If the gate or door will not respond to remotes, the receiver, the antenna or the power is checked.
Gears, drives, sensors, wall controls, capacitors and boards can often be replaced. Before any opener part is replaced, the door's springs and balance are tested, because a heavy door wears any opener out.
If the opener is old, has no safety sensors, needs several parts at once or its board is no longer made, a new opener usually makes more sense. You get a free estimate on both repair and replacement so you can compare.
For homes, a quiet belt drive suits attached garages, a wall-mounted unit suits low ceilings, and a chain drive suits detached garages. For shared garages, a commercial operator sized to the door and its many daily cycles is the right choice.
If a building switches to a different opener or receiver, residents' remotes may need to be replaced or re-paired. Planning that with the building manager avoids a day of residents unable to get in.
Older openers may lack modern sensors or have weak reverse settings. Every opener should reverse on contact and when its sensors are blocked. That is tested on every visit.
The technician identifies your Linear model, tests the door's balance, checks the sensors, drive, board, receiver and remotes, explains what is wrong with a free estimate, and after the repair sets the force and travel and tests the safety reverse.
We also repair LiftMaster, Chamberlain, Genie, Craftsman, Marantec, Stanley and other openers, and install new ones. If parts for your opener are no longer made, you hear that plainly, with options.
For apartment and condo garages, a broken door affects every resident at once. We work with building managers to keep shared doors running, add and remove remotes, and plan any opener replacement so residents are not locked out.
An older Linear chain drive can be loud, and much of that noise comes from the door itself: worn rollers, dry hinges and a door that is out of balance. New sealed rollers and a balanced door make any opener quieter. For real quiet, a belt drive or wall-mounted opener is the upgrade.
A light that will not turn on, or a wall button that works only sometimes, often points to the wall control or its wire rather than the opener itself. A new wall control is a simple fix and often adds a lock button.
Driveway gates with Linear receivers and keypads face rain, sun and cold all year. Receivers lose range, keypads wear out and gate operators need their limits and safety devices checked. We service gate openers along with garage doors, so one call covers both.
Many older Linear openers do not connect to Wi-Fi. A smart add-on can sometimes give phone control and alerts, or a new opener can include it built in. The Wi-Fi signal in the garage is checked first.
Some buildings use an outside keypad for residents or deliveries. Codes should be changed when staff or tenants change, and worn keypads replaced. A keypad that blinks but does not open the door usually needs a new battery or to be paired again.
Common sensors, wall controls and remotes for these openers are on the truck.
Yes, including their remotes, receivers and sensors.
Usually a weak battery, lost pairing, lock mode or a receiver problem.
Yes. We set up and test remotes for shared doors and work with building managers.
Repair if parts are available and the unit is sound. Replace if it lacks safety sensors or needs several parts.
Yes. You see what is wrong and the options before any work starts.
Across Brooklyn, Queens and Long Island, tell us what the door is doing and we set a visit that fits your day.
Free estimate, call (929) 429-2429.
Tell us what the door is doing and we will give you an honest arrival time. The estimate is free.
Easier to explain by phone? Call (929) 429-2429.
Tell us what the door is doing. The estimate is free either way.