
Takes 30 seconds. We call you back to set a time.
Most garages in Brooklyn, Queens and on Long Island run on one of three opener brands: LiftMaster, Chamberlain or Genie. We install and repair all three every week, so we see how they hold up after years of use. Here is how they compare from the ladder, not from a store shelf, and how to pick the one that suits your door and your home. Free estimate at (929) 429-2429.
By Sean Cohen, owner, On Point Garage Doors · Updated
These photos are from our own jobs, with our logo on them.



LiftMaster and Chamberlain come from the same company. LiftMaster is the professional line, sold and installed by garage door companies. Chamberlain is the retail line sold in home stores. Many older Craftsman openers were also made by the same company.
Genie is a separate company with its own designs, its own app and a long history of screw-drive openers. Genie openers are sold both through stores and through installers.
In our experience, LiftMaster's professional models tend to have heavier rails, stronger mounting and parts made for daily heavy use, which is why most installers choose them. Chamberlain models share much of the same technology in a lighter package that suits average use.
Genie openers are reliable and widely used. Their screw-drive models have fewer moving parts but are louder than a belt. Their belt and chain models compete directly with the others.
LiftMaster and Chamberlain use the myQ app, which is the most common garage app we set up. Genie uses its own app, Aladdin Connect. Both let you open and close the door from your phone, get alerts and share access.
Whichever brand you choose, the garage needs a good Wi-Fi signal for the app to be reliable.
All three make quiet belt-drive models. For a bedroom over the garage, a belt drive or a wall-mounted unit is the way to go. Chain and screw drives are louder and fine for detached garages.
A big part of opener noise is actually the door: worn rollers and dry hinges. New sealed rollers make any opener sound quieter.
Wall-mounted openers sit beside the door on the spring bar and free the ceiling for storage, a car lift or a low garage. LiftMaster's wall-mount is the one we install most. Genie and Chamberlain also make wall-mounted models. They need a torsion spring system to mount on, which most doors here have.
Because LiftMaster and Chamberlain share so much, their parts and repairs are similar, and parts are easy to get. Genie parts are also common. Very old openers of any brand may have boards or gears that are no longer made, and then a new opener is usually the better choice.
A well-installed opener on a balanced door will outlast a better brand bolted onto a door with tired springs. Before any opener goes in, we check the springs, cables, rollers and tracks, balance the door, and mount the opener solidly. That is what decides how long it lasts.
All three brands offer battery backup on many models, so the door works during a power outage. All three use safety sensors and rolling codes. We set the force and travel for your door and test the safety reverse on every install.
All three brands sell remotes and outside keypads, and most cars with built-in opener buttons pair with them. Some newer LiftMaster and Chamberlain openers need a small bridge to talk to older car buttons, which we fit when needed. Genie remotes and keypads pair with Genie openers.
If you are switching brands, the old remotes will not work with the new opener, so new ones are set up for everyone in the house during the install.
Some newer models from each brand open faster and start and stop softly, which is easier on the door and quieter. A soft start matters most on heavy wood and insulated doors, where a hard jolt at the start of every trip slowly works the hinges and brackets loose.
Any of the three can give many years of service on a balanced door. The openers we see fail early are almost always on doors with tired springs, worn rollers or a rail mounted to a single weak board. Installation and the health of the door decide lifespan more than the badge on the cover.
The technician looks at your door, your ceiling, how the garage is used and what is above it, then shows you the options from each brand that fit, with a free estimate for each. You choose.
They are made by the same company. LiftMaster is the professional line with heavier parts on many models; Chamberlain is the retail line. Both use myQ.
Genie openers are reliable and widely used. LiftMaster professional models are often built heavier, which is why many installers prefer them.
Belt drive and wall-mounted models from any of the three, especially with new rollers on the door.
Yes. LiftMaster and Chamberlain use myQ; Genie uses Aladdin Connect.
Yes. You see the options from each brand that fit your garage before any work starts.
Across Brooklyn, Queens and Long Island, tell us what the door is doing and we set a visit that fits your day.
Free estimate, call (929) 429-2429.
Tell us what the door is doing and we will give you an honest arrival time. The estimate is free.
Easier to explain by phone? Call (929) 429-2429.
Tell us what the door is doing. The estimate is free either way.