Serving Brooklyn, Queens and Long Island(929) 429-2429Open six days a weekFree estimateGuaranteed work
On Point Garage Doors
Open 24 hours Sun-Thu, Fri until 5 pm Free estimate Springs, openers, cables We come to you
Emergency?Call nowBook free estimate
New York, NY - open six days a week

Storefront roll-down gate motors

Free estimateSame-day serviceCommon parts on board
  • Free estimate
  • Same-day service
  • Common parts on board
Emergency garage door repair★★★★★ 5.0 on Google · 42 reviews

Book your free estimate

Takes 30 seconds. We call you back to set a time.

Or just call (929) 429-2429 and talk it through.

Home › Roll-Down Gate Motors

On the shopping streets of Brooklyn and Queens, the roll-down gate is the first thing up in the morning and the last thing down at night. Many gates are lifted by a motor mounted above the gate or inside the hood. When that motor stops, the shop either cannot open or cannot lock up. We repair gate motors, replace them when needed, and add motors to gates that are still lifted by hand. Free estimate at (929) 429-2429.

By Sean Cohen, owner, On Point Garage Doors · Updated

Real jobs. Real photos.

These photos are from our own jobs, with our logo on them.

New garage door spring installed by On Point Garage Doors
Springs inside a barrel
Control board, from one of our jobs
Control board
Guides and track, from one of our jobs
Guides and track

Common motor problems

  1. Motor hums, gate does not moveA failed capacitor, a jammed gate or a brake that will not release.
  2. Gate stops partwayLimit switches out of adjustment or a gate binding in its guides.
  3. Gate drifts down after stoppingA worn brake inside the motor.
  4. Nothing happensThe key switch, the wiring, a breaker or the motor itself.
  5. Motor runs hot or tripsAn unbalanced gate making the motor work too hard.

The gate matters as much as the motor

A gate motor is meant to drive a balanced gate. When the springs inside the barrel lose tension, the gate gets heavy and the motor strains, overheats and wears out. When slats are bent or the guides are packed with grit, the gate binds. Before a motor is replaced, the gate is checked and fixed.

The curtain, guides and springs are covered on the rolling steel door repair and roll-up door pages.

Limits and brakes

Limit switches tell the motor where to stop at the top and bottom. When they drift, the gate stops short, or drives too far and damages itself. The brake holds the gate in place when the motor stops. Both are adjusted or replaced as part of a motor repair.

Key switches and controls

Many storefront gates are run from a key switch on the wall or the gate frame. Switches wear out, get damaged or fill with water. A new switch, sometimes with a remote, is a simple repair.

Manual chain backup

Most gate motors have a hand chain so the gate can be moved during a power outage or a motor failure. If the chain does not work, there is no way to open or close the gate without the motor. That is checked on every visit.

Motorizing a hand-lifted gate

Shop owners who lift a heavy gate by hand every day often ask for a motor. Most gates can take one, once the springs are balanced and the gate moves freely. A motor makes opening and closing easy and safer for staff.

Gates that are hard to lock

A gate that does not come all the way down cannot be locked. Bent bottom bars, worn locks and limit settings are common causes. The gate is set to close fully and the lock lined up so it secures properly every night.

Fixing the motor or a new one

Capacitors, brakes, limit switches, key switches and wiring are common repairs. When the motor is burned out or too small for the gate, a new motor sized to the gate is installed. You get a free estimate on both.

The bigger operators used on warehouse and garage doors are on the commercial door operator page.

Urgent calls

A gate stuck open at closing time leaves the shop exposed, and a gate stuck closed in the morning keeps it from opening. Tell us when you call and the visit is treated as urgent.

What a visit includes

The technician runs the gate, checks the motor, brake, limits, switch and wiring, checks the barrel springs, slats, guides and bottom bar, and explains what is wrong with a free estimate. After the repair, the limits are set and the manual chain is tested.

Keeping the gate running

Clearing grit from the guides, checking the spring tension and testing the motor and brake once or twice a year keeps a storefront gate reliable through busy seasons and cold winters.

Motors in cold and wet weather

Storefront gate motors live outdoors or in a hood above the gate, where rain, snow and salt reach them. Water in the key switch or the motor's wiring is a common winter failure. Sealed switches, covers and a dry, solid mount keep the motor running through bad weather.

Gates on corner shops

Corner shops often have two or three gates on one front, each with its own motor or hand chain. When several gates are motorized, the switches are labeled and placed where staff can reach them safely. Each gate is balanced so the motors share the work evenly.

Noise from a gate motor

A motor that grinds, bangs at the top or bottom, or rattles the whole gate usually has limits set wrong, a worn brake or a gate that is out of balance. Setting the limits, servicing the brake and balancing the gate makes it quieter for the shop and the neighbors upstairs.

Gates on mixed-use buildings

On buildings with apartments over the shops, a loud gate motor at dawn or late at night bothers the tenants. Quiet, well-adjusted motors and balanced gates keep the peace with the neighbors upstairs.

Questions we get asked

Why does my roll-down gate motor hum but not move?

Usually a failed capacitor, a brake that will not release or a gate that is jammed or too heavy.

Why does my gate drift down after it stops?

The brake inside the motor is usually worn and needs to be serviced or swapped.

Can you add a motor to my hand-lifted gate?

Usually yes, once the gate's springs are balanced and it moves freely.

Can the gate be opened during a power outage?

Most motors have a manual chain for that. We check it works.

Is the estimate free?

Yes. You see what is wrong and the options before any work starts.

Booking takes a minute

Across Brooklyn, Queens and Long Island, tell us what the door is doing and we set a visit that fits your day.

Free estimate, call (929) 429-2429.

Gate stuck open or closed? We will get it moving

Tell us what the door is doing and we will give you an honest arrival time. The estimate is free.

Easier to explain by phone? Call (929) 429-2429.

Two minutes to a free estimate

Tell us what the door is doing. The estimate is free either way.

Or just call (929) 429-2429 and talk it through.

The other six things that go wrong