
Takes 30 seconds. We call you back to set a time.
A fire-rated rolling door looks like an ordinary steel roll-up door, but it has a second job. When a fire breaks out, it is meant to close by itself and help keep flames and smoke from spreading through a building. That only works if every part of the closing system is in good order. A door that sticks, drags or has had its release tied up may look fine during a normal day and fail when it matters most. Free estimate at (929) 429-2429.
By Sean Cohen, owner, On Point Garage Doors · Updated
These photos are from our own jobs, with our logo on them.



Fire-rated rolling doors usually sit inside a building rather than on the outside wall. You see them over openings between a warehouse and an office area, at kitchen pass-throughs and service counters, in stairwell and corridor openings, and between sections of larger commercial and mixed-use buildings.
Many stay open all day and are easy to forget. They roll up into a hood above the opening, and from the floor the only clue is often a small label on the guide or the hood.
In everyday use the door is held open. A release device keeps it there. On older doors that device is a fusible link, a small metal piece that melts when the air around it gets hot enough. Newer systems may also connect the door to the building's fire alarm, so the door lets go when the alarm sounds.
Once released, the door comes down under the pull of gravity and its own spring. A speed governor keeps it from slamming. The goal is a controlled, steady close all the way to the floor.
The most common issue has nothing to do with broken parts. Boxes, shelving, carts and displays end up stacked under the door because the opening looks unused. If the door is released in a fire, it lands on whatever is there and the opening stays open.
Keeping the full width of the opening clear, from guide to guide, is one of the most important things a building can do for these doors.
Sometimes a door closed on its own after a false alarm or a power problem, and someone tied it up to stop it from happening again. That turns a safety device into a plain opening. If your door has been strapped, chained or blocked, tell us. The cause of the unwanted closing is usually something we can find and fix, so the door can go back to doing its job.
Fire-rated doors are expected to be tested on a regular basis. During a drop test, the door is released the way it would be in a fire, and it should close fully and evenly, then be reset. The rules, the schedule and who may sign off on the test are set by the fire codes and the local authority that oversees your building.
We do not certify fire doors or fill out inspection paperwork. What we do is the mechanical side: finding why a door failed a test, repairing it, and getting it to close and reset smoothly before it is tested again.
On rolling fire doors we work on bent guides, damaged slats, worn bottom bars, tired springs and barrels, sticking curtains and doors that will not reset after a drop. Where a part has to be replaced, it should be one meant for that door, because a rated door depends on its own approved parts. When a door is beyond repair, we explain that plainly.
For everyday rolling doors that are not fire-rated see rolling steel door repair, and for the motor side see commercial door operators.
Many buildings across Brooklyn and Queens have fire doors that were installed decades ago and have been painted over, patched and moved around since. Paint in the guides, rust on the spring barrel and dented slats are common. Older doors can often be brought back to good working order, but sometimes the honest answer is that the door has reached the end of its life.
The technician looks at the door, the hood, the guides and the curtain, checks the release and the closing system, and watches how the door behaves. You get a clear explanation of what is wrong and a free estimate before any work starts. If the building has an inspector or a property manager involved, we are happy to explain our findings to them as well.
Keep the opening clear, report a door that has started to make new noises, and never tie a fire door open or block its release. If a door closed unexpectedly, leave it down and call, rather than forcing it back up. Small problems caught early are much simpler to fix than a door that jams during its test.
A steel rolling door built to close by itself during a fire and help slow the spread of flames and smoke between parts of a building.
A release device lets it go. Older doors use a fusible link that melts with heat; many newer doors are also tied to the fire alarm.
A false alarm, a power problem or a failing release can drop the door. The cause should be found and fixed, not tied up.
No. We handle the mechanical repairs. Testing rules and sign-off come from the fire codes and the local authority for your building.
Yes. You see what is wrong and the options before any work starts.
Across Brooklyn, Queens and Long Island, tell us what the door is doing and we set a visit that fits your day.
Free estimate, call (929) 429-2429.
Tell us what the door is doing and we will give you an honest arrival time. The estimate is free.
Easier to explain by phone? Call (929) 429-2429.
Tell us what the door is doing. The estimate is free either way.