
Takes 30 seconds. We call you back to set a time.
Most manual gates can be made automatic. A swing gate gets an arm or a hidden operator at the post, a sliding gate gets a motor that drives it along a rack, and you open it from the car with a remote, a keypad or your phone. What decides the job is the gate itself: it has to move freely and hang straight before any motor goes on it. We look at the gate first and tell you what it needs. Free estimate at (929) 429-2429.
By Sean Cohen, owner, On Point Garage Doors · Updated
These photos are from our own jobs, with our logo on them.



A gate that drags on the ground, sags at the latch or binds at the hinges needs that fixed first. A motor on a gate that does not move freely strains, trips and wears out early.
Swing gates are usually motorized with an arm that mounts on the post and pushes the gate open, or with an operator hidden in the post or under the ground at the hinge. Arm operators suit most driveway gates. Hidden operators keep the look clean but need more work at the post. The right choice depends on the post, the hinge side, how wide the gate is and how much room there is behind it when it opens.
A sliding gate is driven by a motor on a pad beside the opening, with a gear that runs along a rack fixed to the gate. It needs room along the fence for the gate to slide into, a level track or sound cantilever rollers, and stops at both ends. Many older sliding gates were built to be pushed by hand and need new wheels, rollers or a straightened track before a motor can run them well.
An automatic gate is heavy and moves on its own, so it must stop and reverse when something is in the way. We fit safety eyes across the opening and set the operator to stop and reverse on contact. Children, pets and cars are the reason. We also show you how to release the gate by hand if the power goes out, so you are never locked in or out.
Once the gate is automatic, you choose how to open it. Remotes clip to the car visor. A keypad at the gate lets family and visitors in with a code. Many operators can also connect to a phone app, so you can open the gate for a delivery or check whether it is closed. If you already have a garage door opener, we can often set up the car buttons to run both.
On a shared driveway, everyone who uses the gate needs a way to open it. Keypads with separate codes and extra remotes keep that simple. For a small business lot, the gate can be set to stay open while the business is open and close after. We set it up the way the people who use it every day actually need.
Rolling security gates on shops are a different job from driveway gates. Turning a manual storefront gate into a motorized one means a motor on the barrel, new controls and a manual backup. If that is the gate you have in mind, see our page on storefront roll-down gate motors, or call and tell us about it.
Some old gates are too light, too bent or too rusted to carry a motor. If the frame is failing, a new gate built for an operator is the better path. You hear that plainly on the first visit, together with what the conversion would take on the gate you have now. You decide.
Automatic gates need a little care to stay reliable. Hinges, wheels and rollers should move freely, the safety eyes should be clean and lined up, and the operator should be checked once in a while for wear. Snow and ice can block a sliding gate track or a swing gate's path. We can look at the gate on a regular visit and fix small problems before they stop it.
The technician looks at the gate, the posts, the hinges or track and the power near the gate, then explains which operator fits and what the gate needs first. You get a free estimate in writing across Brooklyn, Queens and Long Island before any work starts.
Most swing and sliding gates can, as long as the frame is sound and the gate moves freely by hand. A sagging or dragging gate is fixed first.
Usually an arm operator on the post, or a hidden operator at the hinge. The choice depends on the post, the gate width and the room behind it.
It should be. We fit safety eyes and set the operator to stop and reverse when something is in the way.
Yes. Every operator has a manual release, and we show you how to use it.
Often, yes. Many operators connect to a phone app, and car buttons can usually be set to run the gate and the garage door.
Yes. We look at the gate and put the work in writing before anything starts.
Across Brooklyn, Queens and Long Island, tell us what the door is doing and we set a visit that fits your day.
Free estimate, call (929) 429-2429.
Tell us what the door is doing and we will give you an honest arrival time. The estimate is free.
Easier to explain by phone? Call (929) 429-2429.
Tell us what the door is doing. The estimate is free either way.