
Takes 30 seconds. We call you back to set a time.
Overhead Door is best known for doors, but the brand also sells its own garage door openers through its dealers, with names like Legacy, Odyssey and Destiny on the cover. Many homeowners have one without knowing it, because it came with the door. These openers come from the same company family as Genie, and they share a lot with Genie units, from the remote technology to the safety sensors. We repair Overhead Door brand openers across Brooklyn, Queens and Long Island, and we tell you when a repair is worth it and when a new unit makes more sense. Free estimate at (929) 429-2429.
By Sean Cohen, owner, On Point Garage Doors · Updated
These photos are from our own jobs, with our logo on them.



Look at the light cover and the label on the motor head. Overhead Door openers usually carry the brand name and a model line such as Legacy, Odyssey or Destiny. If the door came from an Overhead Door dealer, there is a good chance the opener did too. Knowing the line helps us bring the right parts, because the drive, the board and the remotes differ between lines and between years.
Overhead Door and Genie belong to the same company, and many of their openers share designs. The rolling code system, often called CodeDodger, and the Safe-T-Beam safety sensors appear on both. That is good news for repairs, because many parts and remotes overlap. It also means some fixes are simple: a remote that does not pair or a sensor that blinks often comes down to the same few causes on either brand.
A hum with no movement usually means one of three things: a broken spring that makes the door too heavy, a worn drive gear or coupler inside the opener, or a trolley that has come loose from the drive. We start by checking the door, because a broken spring is the most common cause and the most dangerous to ignore. Then we open the opener and look at the drive parts.
When a door goes back up just before it reaches the floor, or right after it starts down, the safety sensors are the first place we look. A sensor knocked out of line, a dirty lens, sun shining straight into one eye or a damaged wire all stop the door from closing. If the sensors are fine, the cause may be the force setting, the travel limits or a door that binds somewhere in the track.
Remotes fail from dead batteries, worn buttons or an opener that lost its codes after a power cut. Keypads outside take rain and cold. Some older Overhead Door remotes will not pair with newer openers. We test each remote, pair the ones that work with your opener, and replace the ones that do not with compatible remotes, including the button in your car where it matches.
An opener that clicks but does not move may have a failing relay or a board problem. One that is completely dead may have lost power at the outlet, a tripped circuit or a failed board. Lights that stay on or will not come on point to the board or the bulb socket. We test the power, the wall console and the board before we decide what needs replacing.
Overhead Door has sold openers with different drives over the years. Screw drives can wear the threaded rod and the carriage, chain drives can stretch and slap, and belt drives can fray or skip. Each one is repaired differently, and parts are specific to the drive. We look at the drive before we order anything so the repair fits your exact unit.
Lightning and power surges are hard on opener boards. If your opener stopped working after a storm, the board, the wall console or the sensors may have been damaged. Sometimes the opener only needs its settings and remotes restored. We find out which it is, and if the board is gone, we tell you whether a new board or a new opener makes more sense for its age.
An opener can only move a door that is balanced and free. Weak springs, worn rollers, a frayed cable or a bent track all make the opener work harder until something gives. We disconnect the opener and lift the door by itself on every call. If the door is the real problem, we fix that first, because a new opener on a bad door does not last.
Many Overhead Door openers are worth repairing: a gear, a sensor, a remote or a board on an opener that is otherwise healthy. When the unit is very old, parts are hard to find and it lacks a modern safety reverse, a new opener is the better choice. We can install a new Overhead Door or Genie unit and keep your remotes where they are compatible, or suggest another brand that suits the garage.
We test the door, the opener, the sensors, the controls and the safety reverse, find the cause and explain it plainly. You get a written estimate before any work is done, and after the repair we run the door several times and test every control you use.
They come from the same company and share many parts and technologies, but they are sold under different names. Many repairs and remotes overlap.
We repair the common lines we see, including Legacy, Odyssey and Destiny units, on screw, chain and belt drives.
Often, if both use the same code system. We test remotes on the opener and pair the ones that match.
Not always. Sometimes it only needs settings and remotes restored. If the board is damaged, we tell you whether a new board or a new opener makes more sense.
Yes. We find the cause and give you a written estimate before any work is done.
Across Brooklyn, Queens and Long Island, tell us what the door is doing and we set a visit that fits your day.
Free estimate, call (929) 429-2429.
Tell us what the door is doing and we will give you an honest arrival time. The estimate is free.
Easier to explain by phone? Call (929) 429-2429.
Tell us what the door is doing. The estimate is free either way.