Serving Brooklyn, Queens and Long Island(929) 429-2429Open six days a weekFree estimateGuaranteed work
On Point Garage Doors
Open 24 hours Sun-Thu, Fri until 5 pm Free estimate Springs, openers, cables We come to you
Emergency?Call nowBook free estimate
Garden blocks, side-street garages and busy avenues

Sunnyside Garage Door Repair

Free estimateSame-day serviceCommon parts on board
  • Free estimate
  • Same-day service
  • Common parts on board
Emergency garage door repair★★★★★ 5.0 on Google · 42 reviews

Book your free estimate

Takes 30 seconds. We call you back to set a time.

Or just call (929) 429-2429 and talk it through.

Home › Sunnyside Garage Door Repair

Real jobs. Real photos.

These photos are from our own jobs, with our logo on them.

Old door out, new door in: before and after photo from one of our jobs
Old door out, new door in
New white door, photo from one of our jobs
New white door
New remotes, set up on site, photo from one of our jobs
New remotes, set up on site

Garage door repair in Sunnyside for the homes and small buildings with garages on the side streets, the garage rows tucked behind the garden blocks, the businesses near the rail yards and the shop gates along the main avenues. Free estimate first.

Few garages, carefully kept

The historic garden blocks were built around shared courtyards rather than driveways, so private garages here are scarce and the owners who have them rely on them.

Garage rows behind some buildings hold several doors side by side, often of different ages.

Simple steel doors in muted colors suit the brick garden blocks.

Where a row of garages is shared, one owner's new door can look out of place next to the old ones.

Doors are chosen to fit the row, and springs and openers are matched to each door.

Warehouses, repair shops and businesses near the big rail yards use roll-up and sectional doors that open for trucks all day.

A loading door on the industrial blocks by the rail yard that is stuck open at night is treated as urgent.

Streets near the rail yards carry heavy truck traffic, and grit settles in tracks and gate guides.

Stores along Queens Boulevard and Skillman Avenue roll their gates up early and pull them down late.

Gates that drag or will not lock are rebalanced and their locks fixed.

Some garages are rented out to neighbors for storage, and the renter may not know the door's history.

New garage door on a detached garage, installed by On Point Garage Doors

Repairs for row garages and shop gates

Garage in a row, door on a business or gate under the elevated train, each one is seen before any estimate.

Owners of garages in a row often want a door like the ones beside it, so samples come along to hold against the neighbors' doors.

New garage door and opener seen from inside the garage, an On Point Garage Doors job
New garage door with windows on a brick house, installed by On Point Garage Doors
Caved-in garage door panels before On Point Garage Doors replaced the door

What fails on each kind of door

Private and row garages. Broken springs, worn rollers, old openers and doors that no longer seal.

Doors are matched to their neighbors in the row when replacement is chosen.

When a door fights the opener, the springs are tested before the opener gets blamed.

Business doors near the yards. Heavy springs, guides, bottom bars and operators.

On business doors the photo eyes and the safety edge are tried every time we come out.

Store gates under the train. Slats, springs, bottom bars, locks and gate motors all take a beating.

Hand-lifted gates that have turned heavy are balanced again so one person can raise them.

Gate motors are matched to the gate's size and weight.

Openers. Old units without safety sensors are replaced with modern openers.

Remotes and keypads are paired and tested.

Insulated doors help garages used as workshops through the winter.

A door or gate that has been hit should be left in place until it has been looked at.

A truck backing to a loading door can bend the bottom bar and the guides in one go, so both are inspected.

Our crews across the borough and beyond

The garden blocks and the avenues under the train are a regular part of our Queens route, and the same crews go out to Brooklyn and Long Island.

Your call notes go to the technician before the visit.

A car locked in a row garage, or a loading door that will not shut at night, goes to the front of the line.

Through the year on the garden blocks

Winter. Cold breaks springs that were already worn, and ice seals doors to the ground.

Cold nights also glue garage and dock seals to the pavement; a frozen door is left to thaw free rather than being forced.

Spring. Rain gets under worn bottom seals and rusts the lowest track.

Summer. Heat and dust from the avenues dry out gate guides.

Fall. Leaves from the trees in the garden courts collect in tracks; a checkup clears them out before the cold.

When the technician arrives at the garage

He watches the door or gate run, then goes over springs, cables, rollers, tracks and the opener or gate motor.

What broke is explained without jargon, and the free estimate shows each part on its own line.

Parts are chosen for the real size and weight of the door or gate in front of him.

Springs, cables and rollers for most doors are on the truck.

The safety reverse is demonstrated before he leaves.

Old parts are taken away.

Each door or gate he worked on is run for you before he packs up.

Why a crew that knows these blocks helps

Work on business doors can be planned around deliveries and opening time.

He calls before he arrives.

You decide; nothing is done without your yes.

Where these doors and gates wear out

Old row garages and hard-working shop doors wear out in different places.

Once a spring snaps, the door or gate is dead weight. Keep it closed and call us.

Springs on rarely used row garages can snap after long idle stretches.

Cables fray at the bottom corners, and both sides are changed at the same time.

The drums and bearings get a look on the same visit.

Sensors in tight garage rows are mounted where they will not be kicked.

Tracks and gate guides bent by trucks or cars are trued or replaced before anything runs again.

Bottom track rusted by winter salt from the avenues is cut out and new track goes in.

Openers and operators are tested before parts are replaced.

A quiet belt drive or a commercial operator replaces a worn unit, depending on the door.

How to get on the schedule

Tell us whether it is a private garage, a garage row or a business door.

Every estimate is free.

Back to a working door or gate

Tell us what is wrong with the door or gate and pick a time; estimates are free.

Call us at (929) 429-2429.

A free estimate for garages and gates on these blocks

Say what the door or gate does, and a free estimate is sent back.

Or just call (929) 429-2429 and talk it through.

More repairs