Serving Brooklyn, Queens and Long Island(929) 429-2429Open six days a weekFree estimateGuaranteed work
On Point Garage Doors
Open 24 hours Sun-Thu, Fri until 5 pm Free estimate Springs, openers, cables We come to you
Emergency?Call nowBook free estimate
Brownstone blocks, carriage houses and avenue shops

Park Slope Garage Door Repair

Free estimateSame-day serviceCommon parts on board
  • Free estimate
  • Same-day service
  • Common parts on board
Emergency garage door repair★★★★★ 5.0 on Google · 42 reviews

Book your free estimate

Takes 30 seconds. We call you back to set a time.

Or just call (929) 429-2429 and talk it through.

Home › Park Slope Garage Door Repair

Real jobs. Real photos.

These photos are from our own jobs, with our logo on them.

Caved-in door, made new: before and after photo from one of our jobs
Caved-in door, made new
Two new doors, photo from one of our jobs
Two new doors
Wall-mount opener installed, photo from one of our jobs
Wall-mount opener installed

Garage door repair in Park Slope for the rare private garages on the side streets, the old carriage houses turned into garages, the building garages under newer apartments and the shop gates along the busy avenues near the park. Free estimate first.

A garage here is precious

Most blocks are lined with brownstones and limestones with no garage at all, so an owner who has one depends on it, and street parking makes a stuck door a real headache.

Those garages are often squeezed into narrow lots, with little side room and a door that opens straight onto the sidewalk.

Doors that face the street are a big part of the house's look, so styles are chosen to suit the facade.

Former carriage houses and stables on a few blocks were converted long ago, with arched or oversized openings that no stock door fits.

Custom doors are measured to the opening, and the old masonry and framing are checked before anything is ordered.

Shops, bakeries and restaurants on Fifth and Seventh Avenues roll their gates up each morning and pull them down late, many still by hand or with a motor older than the lease.

A gate that jams halfway on a busy sidewalk is treated as urgent.

Blocks near the park are full of strollers, scooters and dog walkers, so a door that opens onto the sidewalk has to stop and reverse reliably.

Newer condo buildings have parking garages with wide doors shared by many residents.

Those doors cycle all day and need commercial-grade springs, rollers and operators.

Some owners use the garage as a studio or home office and open it only now and then, and springs that sit idle can still snap when used.

Garage door opener installed on the garage ceiling by On Point Garage Doors

Repairs for brownstone garages and avenue gates

Carriage house on a side street, garage under a condo on Fourth Avenue or gate on a shop, each door is seen in person before any estimate.

New LiftMaster remotes programmed by On Point Garage Doors
New garage door rollers next to the worn ones they replaced
Caved-in garage door panels before On Point Garage Doors replaced the door

Carriage houses, condos and shop gates

Private garages. Broken torsion springs, worn rollers, frayed cables and noisy openers under bedrooms are the most common calls.

Doors that open onto the sidewalk get sensors mounted where passing feet will not knock them.

When a house door drags on the way up, the springs are tried first, because a tired spring makes a good opener look weak.

Carriage-house openings. Arched and oversized openings get custom-built doors and hardware matched to their weight.

Old wood doors are measured for a lighter, insulated replacement if the owner wants one.

Building garages. Shared doors get heavier springs and operators sized for constant use.

Fobs, remotes and keypads for many residents are tested after any work.

In garages that double as a studio or a bike room, a wall-mounted opener leaves the ceiling clear for shelves and racks.

Storefront gates. A gate that drops on its own, drags in the guides or will not lock at closing usually needs spring tension, new slats or a bottom bar.

Motors and limit settings on powered gates are checked too.

Insulated doors make garages used as studios and offices far more comfortable.

A door or gate that a car or a delivery truck has hit is left where it is until it has been looked at.

In a narrow garage a side mirror can catch the track on the way in, so the track and the brick jamb beside it are checked together.

Our routes through the borough

The brownstone blocks between the park and Fourth Avenue are a regular stop on our Brooklyn route, and the same crews go out to Queens and Long Island.

Tell us which block, which building or which storefront, and that note travels with the technician.

A car locked in a garage that opens onto the sidewalk, or a shop gate stuck open at closing, goes to the front of the line.

A year between the park and the avenues

Winter. Cold snaps tired springs, and a door that opens onto a snowy sidewalk takes salt and slush at the bottom.

Cold nights also freeze the bottom rubber to the sidewalk edge; a frozen door is left to let go on its own instead of being forced by the opener.

Spring. Pollen and seeds from the big street trees collect in tracks and gate guides.

Summer. Heat dries out the slats and end locks on shop gates, and a gate that squeals in July is often the one that sticks by fall.

Fall. Leaves from the plane trees and the park pile into tracks and gate guides, and a checkup before the cold finds worn parts early.

When the technician gets there

He runs the door or gate a full trip, then goes over springs, cables, rollers, tracks and the opener or gate motor one by one.

What broke is put in everyday words, and the free estimate lists every part on its own line.

Parts are chosen for the real size and weight of the door, which on an arched carriage-house door can be far from standard.

Common springs, cables and rollers ride along on the truck.

The safety reverse is tested on any opener before he leaves.

Worn parts go out in his truck, and the sidewalk in front of the garage is left clear for strollers and neighbors.

The door is run up and down a few times with you watching before he packs up.

Why brownstone experience matters

Shop gates can be scheduled before opening time.

You hear from him before he arrives.

No part goes in until you have said yes to it.

Parts that give out first on these blocks

Narrow lots and heavy use decide which parts wear first.

Once a spring snaps, the door is dead weight. Keep it closed, keep people on the sidewalk clear of it, and call us.

Coils that show daylight between them, or rust across the whole spring, mean it does not have long left.

Cables rust at the bottom where salt water sits against the door; both sides are replaced together.

Drums that the old cable has worn into are changed on the same visit as the new cables.

Sensors by the sidewalk are mounted solidly so strollers and bikes do not knock them out of line.

A track bent by a bumper in a tight garage makes the door bind and shudder; it is straightened or swapped before the door runs again.

Bottom track rusted by winter salt from the sidewalk is cut out and new track goes in.

The opener's board and gears are tested one by one, so only the part that failed gets changed.

When an opener is worn out, a quiet belt drive is the usual choice under living space.

Getting on the schedule

Say whether it is a brownstone garage, a door on a condo building or a gate on a shop, and what it does when you run it.

Every estimate is free, whatever you decide.

Back to a door or gate that works

Tell us what the door or gate is doing and choose a time that suits you; estimates are free.

Call us at (929) 429-2429.

A free estimate for garages and gates near the park

Say how the door or gate behaves, and a free estimate is sent back.

Or just call (929) 429-2429 and talk it through.

More repairs