
Takes 30 seconds. We call you back to set a time.
The door opened fine this morning, and now it will not come down. Maybe it does not move at all when you hit the button, maybe it starts down and goes straight back up, or maybe the opener light flashes and nothing happens. A garage door that will not close leaves your garage and often your house open, so it is one of the calls we treat as urgent. Free estimate at (929) 429-2429.
By Sean Cohen, owner, On Point Garage Doors · Updated
These photos are from our own jobs, with our logo on them.



Every modern opener has two small sensors near the floor, one on each side of the door. They send an invisible beam across the opening. If anything breaks the beam, the opener refuses to close the door, or reverses it. That keeps the door from coming down on a child, a pet or a car. A door that goes down and then comes back up is a different fault, explained on our page about a garage door that won't close.
So when a door goes up but will not go down, the sensors are the first thing we look at. A sensor knocked out of line, a dirty lens, sunlight shining straight into one, a cut wire or a box sitting in the beam all stop the door from closing.
Many openers blink their light or flash a code when the sensors are the problem. Often one sensor has a small light that is off or flickering. If the door starts down and goes straight back up, that is the safety system doing its job, not a broken motor.
If you tell us what the lights are doing, we can usually narrow it down before the visit.
Please do not hold the wall button down to force the door shut past a sensor problem unless you can see the whole opening is clear, and never stand or let anyone stand under a door that is not working right. Do not try to lower a door by hand if a spring or cable looks broken. A door without its springs can drop hard.
Sensors mounted on loose brackets get bumped by bikes, bins and feet. Wires stapled along the wall get chewed or pinched. Sensors facing the morning or evening sun can be blinded at the same time every day, which is why some doors refuse to close only at certain times.
We mount the sensors solidly, protect the wiring and, where sunlight is the problem, change their position or fit sun shields so the door closes every time.
A worn logic board, a failing travel sensor inside the opener or a burned-out power supply can also stop a door from closing. If the sensors and the door test fine, we look inside the opener. Older openers with worn boards are often better replaced, and we give you a free estimate on both options.
A door that will not close is sometimes the first sign of a bigger problem: a weak spring that makes the door heavy, a roller about to jump the track or a frayed cable. While we fix the reason it will not close, we test the balance of the door, look at the springs, cables, rollers and tracks, and tell you what we find.
If the door is stuck open, tell us when you call. The technician makes the door secure first, then fixes the cause. Before leaving, the door is run several times, the travel and force are set, and the safety reverse is tested with an object in the opening.
If the door closes while you hold the wall button but not from the remote, the opener is almost always telling you the sensors cannot see each other. Holding the button overrides the beam on many openers, which is why it seems to work. It is a sign to get the sensors fixed, not a long-term way to close the door.
Most often the safety sensors near the floor are blocked, dirty, out of line or wired badly. Travel limits, a bent track or a broken spring can also stop it.
The safety system thinks something is in the way, or the opener feels resistance. Sensors, a binding door or travel settings are the usual causes.
Yes. Strong sun shining into a sensor can blind it, so the door refuses to close at certain times of day.
Not if a spring or cable may be broken. A door without its springs can fall hard. Keep clear and call.
Yes. The technician finds the cause and explains the fix before any work starts.
Across Brooklyn, Queens and Long Island, tell us what the door is doing and we set a visit that fits your day.
Free estimate, call (929) 429-2429.
Tell us what the door is doing and we will give you an honest arrival time. The estimate is free.
Easier to explain by phone? Call (929) 429-2429.
Tell us what the door is doing. The estimate is free either way.